Filter
Top Products
5-3.Removing Jam
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 53
" Jam in tray
The screen on the right shows an example where the film
cannot be transported from the tray and it jams. Follow the
procedure below to remove the jammed film.
(1) If the film is protruded from the shutter of the tray,
pull the film out to remove.
If the film is not protruded, shake the tray backward and fore-
word several times.
(2) Press in the tray until it locks.
The normal screen will re-appear after a while when the mes-
sage of "PLEASE WAIT" appears.
When there queued print data remains, printing starts automat-
ically.
CAUTION
When pulling out the film, do not open the shutter
of the tray. otherwise, the film in the tray is solar-
ized.