Filter
Top Products
4-3.How To Operate Maintenance Mode
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 21
(4) Touch the box on the right of [PAGE NO], and input
page No. that you wish to re-print.
In order to input the page No., touch the box on the right of
[PAGE NO.], then touch the numeric key on the lower portion
of the screen.
If you input the number incorrectly, touch [C] to clear it, and
input again.
(5) Touch the box on the right of [COPY] and input the
print count.
The procedure for inputting the print count is the same as the
one for inputting the page No.
(6) If you print under the previous print conditions, con-
firm that [OFF] on the right of [CHANGE CONDI-
TION] is selected, and touch [STORE].
The print data on the specified page will be queued.
If the specified page has been already deleted, "PREVIOUS
PAGE ERROR" is displayed.
(7) Touch [ON] on the right of [CHANGE CONDITION]
when you print under different conditions from the
previous ones.
The LUT select screen will appear.
CAUTION
The page specified on the PREVIOUS PRINT
screen will be printed out after the device exits
from the maintenance mode.
CAUTION
The amount of data that can be saved in the
device is about 100 pages.
When the storage becomes full, the data is
erased in order in which it is stored.