Filter
Top Products
3-4.Film Loading
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 11
3-4. Film Loading
When the tray becomes empty, "FILM EMPTY" appears
and [FILM SET] is displayed on the right of the loading
film information of the empty tray.
The screen on the right shows that the upper tray
becomes empty.
• The film size for this device can be selected from
14"x17", 14"x11", and 14"x14". The film size for each
tray is set by a service person at installation.
• It is possible to receive print data from the diagnostic
device while the film is loaded.
Follow the procedure below to load the film.
(1) Touch the displayed [FILM SET].
The message showing the tray being opened appears.
Then, the empty tray pops out slightly, and the screen showing
the procedure for loading the film (next page) is displayed.
Message for tray being opened
CAUTION
If a film is in print process, the cover will not open
until the printing completes. It will take max. 95
seconds.