Filter
Top Products
4-3.How To Operate Maintenance Mode
38 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
" Setting print preference
The print preferences are set for each of the diagnostic devices. Follow the procedure below to set the print
preferences.
(1) Touch [PRINT CONDITION] on the maintenance
menu screen.
The print preference set screen (PRINT CONDITION) listing
the name of the connected diagnostic devices will appear.
(2) Touch a name of the diagnostic device for which the
print preferences are set.
The selected diagnostic device name will be highlighted.
When 10 or more diagnostic devices are connected, touch [$] /
[%] to scroll the list of the diagnostic device names.
(3) Touch on the upper part of the screen.
The LUT select screen (1/7) will appear.
(4) Touch a LUT name you wish to apply for printing.
The selected user LUT name will be highlighted.
For the LUT to be applied on the diagnostic device, you can
select one from 8 user LUTs.
It is necessary to copy and set the user own LUT or the LUT
recommended by Konica. (Refer to "Setting user LUT" on
page 42.)
(5) Touch on the upper part of the screen.
The print preference set screen (2/7) will appear.