Filter
Top Products
4-3.How To Operate Maintenance Mode
20 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
" Re-printing Printed Page (PREVIOUS PRINT)
In this device, as the data that has already been printed is stored in the inner hard disk, re-printing can be made
later. In this case, it is possible to change the print preferences such as the LUT applied for printing, print density,
and contrast, etc.
Follow the procedure below to re-print.
(1) Touch [PREVIOUS PRINT] on the maintenance
menu screen.
The PREVIOUS PRINT screen (diagnostic device select
screen) will appear.
The names of the connected diagnostic devices are listed on the
diagnostic device select screen.
(2) Touch the name of the diagnostic device from
which the print data is received to print.
The selected diagnostic device name will be highlighted.
When 10 or more diagnostic devices are connected, touch [$] /
[%] to scroll the list of the diagnostic device names.
(3) Touch on the upper part of the screen.
The print page set screen will appear.
NOTE
The print data in the device is stored for each diagnostic device. The page number is assigned to
each print data in order in which it is received from the diagnostic device and printed out. (The
page No. is printed on the upper part of the film as the film management information.)
1 0 0 1 P 300 20 32768 662 115301771170003 1,0R01 CH1:REGIUS_350 PAGE:4
Page No.Film management information