Filter
Top Products
3
Transmission
3-42 C450
3.12.3 To perform a quick memory transmission
Quick memory transmission
1 Press [Fax] on the control panel to view the fax screen, if it is not al-
ready displayed.
2 Press [Comm. Setting] on the fax screen.
3 Press [Quick Memory TX].
4 Press [OK].
– To cancel the setting, press [Cancel].
The quick memory TX is set to return to the fax screen.
5 Set other functions if necessary.
– See “Setting transmission conditions” on page 3-11 for setting
functions on the fax screen. See “Opening the scan setting screen
and comm. setting screen” on page 7-3 for setting functions on the
fax application screen.
6 Designate the destination.
– For details, refer to “Selecting one destination” on page 3-21.
7 Set the original document.
– For details, refer to “Placing the original on the machine” on
page 3-7.
8 Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.