Filter
Top Products
Utility mode
11
C450 11-17
11.4 Initial setting
Set the default of the fax function.
It is possible to set a fax function that is selected when the main power is
turned on or when [Reset] is pressed.
For this setting, display the fax screen and press the [Utility/Counter] on this
screen.
* Indicates factory default setting.
Initial setting
1 Open the user setting screen (See “Entering user setting” on
page 11-3).
2 Press [Initial Setting].
– Some items may not be displayed depending on the optional set-
tings.
– In the utility mode, it is also possible to enter a number displayed in
the key through the keypad for selection. In the case of [Initial Set-
ting], enter 3 through the numeric keypad.
Item Description Available value
Fax [Current Setting]:
Before entering the utility mode, each of the
items that have been set on the touch panel is
registered as the default of fax function.
[Factory Default]:
Values set when shipped from the factory are
registered as the default of fax function.
Current Setting
*
/ Factory
Default