Filter
Top Products
7
Transmission applications
7-20 C450
4 When you want to make the edge section clear and sharp, or when you
want to make it smooth, press [ ] or [ ] to the [+] or [-] side.
5 Press [OK].
– To release the setting, press [Cancel].
The application screen will be restored.
6 Press [OK].
The scan setting screen will be restored.
7 Press [OK].
The fax screen will be restored.
8 Set other functions if necessary.
– See “Setting transmission conditions” on page 3-11 for information
about setting functions in the fax screen. See “Application func-
tions overview” on page 7-5 for information about setting functions
in the fax application screen.
9 Designate the destination.
– See “Selecting one destination” on page 3-21 for designating the
destination.
10 Set the original document.
– See “Placing originals on the platen glass” on page 3-8 for informa-
tion about setting the document.
11 Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.