Filter
Top Products
Reception
4
C450 4-5
4.3 Manual reception (telephone only mode)
Manual reception (telephone only mode)
Fax messages can be received manually when receive mode is set to manual
RX in telephone line settings of utility mode. An external telephone must be
connected to receive fax messages manually.
Refer to “Telephone line settings” on page 11-34 for setting manual recep-
tion.
Refer to the following for procedure of manual reception.
1 Press [Off-Hook] when the external telephone rings.
2 Make sure that [RX] is highlighted.
– If a document is present in the ADF or the platen glass, RX will not
be highlighted even if there is an incoming call. In this case, press
RX to highlight the display.
3 Press [Start] on the off-hook menu.
– Pressing [Start] on the control panel open the off-hook screen.
Transmission starts when you press [Yes].
Reception begins.
Arrival of a call
External telephone rings
Lift the handset and start talking
For faxes, press [Start] to receive