Filter
Top Products
Registering/Settings
10
C450 10-25
10.4 Registering the program
A destination (fax number, user box and e-mail) to which a call is made fre-
quently can be combined with the [Scan Setting] or the [Comm. Setting] that
is used as the standard setting before they are registered in the program.
With these information registered in the program, just press the program key
of [Program], and you can set the functions of the registered destination and
the [Scan Setting] or the [Comm. Setting] and send a message.
- For the program, up to 400 (001 to 400) can be registered including the
program of other functions of this machine.
- Each program can have a program name.
The explanation here is given of the operation to register the program, and
the operation to change the program, and the operation to delete the Pro-
gram.
Please observe the following point:
- No registration is available when [Name] and any one of [Scan Setting],
[Comm. Setting] or the destination are not set.
Registering the program
The procedure for registering the program is as follows.
1 See “Displaying the fax registration screen” on page 10-3, to display
the fax registration screen.
2 Press [Program].
– In the utility mode, it is also possible to enter a number displayed in
the key through the keypad for selection. In the case of [Program],
enter the "3" on the keypad.