Filter
Top Products
Polling
9
C450 9-5
5 Press [OK].
– To release the setting, press [OFF] or [Cancel].
The comm. setting screen will be restored.
6 Press [OK].
The fax screen will be restored.
7 Set other functions if necessary.
– See “Setting transmission conditions” on page 3-11 for information
about setting functions in the fax screen. See “Application func-
tions overview” on page 7-5 for information about setting functions
in the fax application menu.
8 Set the original document.
– See “Placing the original on the machine” on page 3-7 for informa-
tion about setting the document.
9 Press [Start].
The FK-502 scans the document and holds it in memory until the des-
tination sends a polling command, which causes transmission of the
stored document.
!
Detail
If transmission fails, refer to “Cannot send messages” on page 5-3.