Filter
Top Products
10
Registering/Settings
10-28 C450
– In the case of [Direct Input] being pressed:
Enter a destination for setting in the following procedure.
– Press [Abbr. Dial], [User Box] or [E-Mail].
– Enter or select the destination and then press [OK].
– See “Registering the fax number for the address book” on
page 10-6 for entering the dial numbers.
– See “Registering the e-mail for the address book” on page 10-9 for
entering the boxes.
– See “Registering the box for the address book” on page 10-12 for
entering the e-mail addresses.
7 When setting [Scan Setting] or [Comm. Setting], press [ON] to set the
scanning or communication function and then press [OK].
– In the screen displayed by pressing [Comm. Setting] - [E-Mail Set-
ting], [E-Mail Notification] can be set.
– When [E-Mail Notification] is set to [ON], after completion of the job,
the end of the job can be confirmed by sending an e-mail to the
destination of [E-Mail Notification].
– For details of [Scan Setting], [Comm. Setting], see “Transmission
applications” on page 7-3.
8 Press [Close].
– To stop registering, press [Cancel].
When proceeding with the registration of the program, go to step 3.
9 Press [Exit] on the sub-area.