Filter
Top Products
Transmission
3
C450 3-9
3.2.3 Sending multiple originals from the platen glass
Originals that cannot be sent with the ADF can be sent by using the platen
glass.
Sending multiple originals from the platen glass
1 If the fax screen is not displayed, press [Fax] on the control panel to
open the fax screen.
2 Select a destination.
3 Set the desired functions as necessary.
4 Place the original on the platen glass.
Press [Scan Setting] - [Separate Scan]
- [OK] and then press [Start].
5 Place the next original on the platen
glass and press [Start].
– Repeat this procedure until all orig-
inals to be sent have been scanned.
The scanned originals are stored in
memory.
6 Press [Finish].
The document reading mode is canceled.
7 Press [Start].
Transmission begins.