Konica Minolta C450 All in One Printer User Manual


 
3
Transmission
3-48 C450
4 Designate the time to start communication from the keypad.
“Hour” and “minute” of the time to start communication are dis-
played in the 24-hour style, and entered in two digits.
For example: To set the time to start communication at 9:07 p.m.,
input “21” and “07.”
5 Press [OK].
You return to the comm. setting screen.
6 Press [OK].
To release the setting, press [OFF] or [Cancel].
You return to the fax screen.
7 Set other functions if necessary.
See “Setting transmission conditions” on page 3-11 for information
about setting functions in the fax screen. See “Opening the scan
setting screen and comm. setting screen” on page 7-3 for informa-
tion about setting functions in the fax application screen.
8 Designate the destination(s).
For details, refer to “Selecting one destination” on page 3-21.
9 Set the original document.
For details, refer to “Placing originals on the platen glass” on
page 3-8.
10 Press [Start].
The FK-502 reads the document and holds it in memory until the spec-
ified time when transmission starts.