Filter
Top Products
Transmission applications
7
C450 7-31
3 Press [F-Code TX].
4 Enter box no. of the receiving station in the box of SUB address. Press
[Password] and then enter the password with keypad if necessary.
– SUB address and password can be numbers of up to 20 digits.
– When communicating with the FK-502, input 9 digits or less for the
box no. and 8 digits or less for the password. The required digits
are different depending on the device.
– Numerals between 0-9, and symbols # and * can be used for pass-
word.
– To correct a wrong entry, use [Del.].
– Press [C] (clear) to clear the whole entry.
If a password is needed, press [Yes] and enter the password.
5 Press [OK].
– To release the setting, press [OFF] or [Cancel].
The comm. setting screen will be restored.
6 Press [OK].
The fax screen will be restored.