Konica Minolta C450 All in One Printer User Manual


 
Introduction
1
C450 1-7
1.1.3 For New Zealand
Please observe the following points:
- This device is equipped with pulse dialing while the Telecom standard is
DTMF tone dialing. There is no guarantee that Telecom lines will always
continue to support pulse dialing.
- Use of pulse dialing, when this equipment is connected to the same line
as other equipment, may give rise to bell tinkle or noise and may also
cause a false answer condition. Should such problems occur, the user
should not contact the Telecom Fault Service.
- This equipment may not provide for the effective hand-over of a call to
another device connected to the same line.
- This equipment does not fully meet Telecom's impedance requirements.
Performance limitations may occur when used in conjunction with some
parts of the network. Telecom will accept no responsibility should diffi-
culties arise in such circumstances.
- The grant of a telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum condi-
tions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all,
it provides no assurance that any item will work correctly in all respects
with another item of telepermitted equipment of a different make or mod-
el, nor does it imply that any product is compatible with all of Telecom's
network services.
- The automatic calling functions of this equipment must not be used to
cause a nuisance to other customers.
- Telepermitted equipment only may be connected to the auxiliary tele-
phone port. The auxiliary port is not specifically designed for 3-wire con-
nected equipment. 3-wire might not respond to incoming ringing when
connected to this port.
1.1.4 For Europe
The facsimile has been approved in accordance with Council Decision 1999/
5/ EC for pan-European single terminal connection to the public switched tel-
ephone network (PSTN). However, due to differences between the individual
PSTNs provided in different countries, the approval does not, of itself, give
an unconditional assurance of successful operation on every PSTN network
terminal point.
In the event of problems, you should contact your equipment supplier in the
first instance.