Filter
Top Products
Section 6 Various Settings and Registration
6-5
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
Setting the Default Transmission
Mode
You can select which transmission mode, Memory Transmission or
Direct Feed Transmission, will be the default setting in this fax.
If you select “Dir. Feed Tx” here, the “Dir. Feed Tx” key will be shown
in the basic fax screen.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Press the Default key. The Default Setting screen will appear.
2. Touch the “Fax default setting” key.
3. Touch the “▼” cursor key until “TX Mode/Default” is highlighted.
4. Touch the “Change #” key.
5. Select the desired transmission mode setting by touching either the
“Memory TX” key or the “Dir. Feed Tx” key, as appropriate.
6. Touch the “Close” key. If you are finished making settings, press
the Reset key.
Selecting the Automatic Reception
Mode
This fax has 2 or 3 automatic reception modes (depending upon the
model version). The inch version of this fax offers the Automatic Fax
Reception, Auto FAX/TEL Switching and D.R.D. Reception modes.
The metric version contains the Automatic Fax Reception and Auto
FAX/TEL Switching modes. Select from among the available modes
that are available for your fax machine.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Press the Default key. The Default Setting screen will appear.
2. Touch the “Fax default” key.
3. Touch the “▼” key until “Receive Mode” [“Reception mode”] is
highlighted.
4. Touch the “Change #” key.
5. Select the desired reception mode by touching either the “Fax
Reception” [“Fax Rx”] key, the “Auto Fax/Tel. SW” key or the
“D.R.D.” key, as appropriate.
* The “D.R.D.” key will not be displayed in the metric version of this
fax machine.
* If you selected “D.R.D.”, go directly to step 7.