Filter
Top Products
4-27
Section 4 Other Features of this Fax
(Inch)
(Metric)
(Inch)
(Metric)
10. Touch the “Finish dest. Set” [“Dest. set”] key.
11. Enter a name for the program. (Maximum 20 characters)
* In order to enter characters, refer to “Entering Characters” on
page 1-23.)
12. Check the currently registered information and touch the key that
corresponds to any item that you want to modify.
13. Touch the “OK” key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue registering other program keys, repeat
steps 3 through 13. If you are finished registering program keys,
press the Reset key.
(2) Modifying and Deleting
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the “Register” [“Registration”] key. The Registration Select
screen will appear.
2. Touch the “Dial” key.
3. Touch the speed-dial key (program key) containing the information
you want to modify or delete.
* If that key is not displayed, use the “▼” and/or “▲” cursor keys to
switch to the screen that displays the key that you want.
4. If you want to delete the registered program key, touch the “Delete”
key and then go to the next step. If you want to modify the
registered information, touch the “Change contents” key and then
go directly to step 6.
> Deleting a program key
5. Touch the “Yes” key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue deleting other program keys, repeat steps 3
through 5. If you are finished deleting program keys, press the
Reset key.
> Modifying registered information
6. If you want to modify the abbreviated number (the displayed
number of the speed-dial key under which the program key is
registered), touch the “Abbr. #” key. If you want to modify any other
basic information, touch the key that corresponds to that
information. (To modify information, refer to the corresponding step
under “(1) Registering” on page 4-26.)
7. Enter the abbreviated number of an unregistered speed-dial key
(001 - 600).
* Once a 3-digit number is entered, that number may be changed
using the “+” and “-” keys.
8. Touch the “Close” key.
9. Once you are finished modifying all of the items that you want,
touch the “OK” key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue modifying other program keys, repeat steps
3 through 9. If you are finished deleting program keys, press the
Reset key.