Filter
Top Products
Section 6 Various Settings and Registration
6-10
(Inch)
(Metric)
(Inch)
(Metric)
Registering the Remote Test ID
If you have entered into a contract with an authorized service center
for their Remote Diagnosis service, it is necessary to register here in
advance the Remote Test ID that they designate for you.
* A previously registered Remote Test ID can also be modified by
performing the following procedure.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the “Register” [“Registration”] key. The Registration Select
screen will appear.
2. Touch the “Remote Test ID” key.
3. Use the keypad to enter the designated 4-digit Remote Test ID.
* If you want to revise the entered number, touch the “r” or “R”
cursor key to move the cursor to the number that you want to
change.
4. Touch the “Confirm” key. The message display will return to the
same screen as was displayed in step 2. If you are finished making
settings, press the Reset key.