Filter
Top Products
4-30
Section 4 Other Features of this Fax
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
5. Use the keypad to enter the desired Permit Telephone Number.
(Maximum 20 digits)
* You can use the “r” and/or “R” keys to move the cursor to a
desired location, and you can clear the entered number by
touching the “Delete” key.
6. Touch the “OK” key.
The message display will return to the same screen as was
displayed in step 4. If you want to continue registering other Permit
Telephone Numbers, repeat steps 4 through 6. If you are finished
registering Permit Telephone Numbers, press the Reset key.
(2) Modifying and Deleting Permit
Telephone Numbers
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Perform steps 1 through 3 of “(1) Registering Permit Telephone
Numbers” on page 4-29.
2. Touch the key which displays the Permit Telephone Number you
want to modify or delete.
3. If you want to delete the registered Permit Telephone Number,
touch the “Delete” key and then go to the next step. If you want to
modify the registered information, touch the “Change contents” key
and then go directly to step 5.
> Deleting a Permit Telephone Number
4. Touch the “Yes” key.
The message display will return to the same screen as was
displayed in step 2. If you are finished deleting Permit Telephone
Numbers, press the Reset key.
> Modifying information
5. Press the Stop/Clear key to delete the old number and then enter
the new Permit Telephone Number, or use the “r” and/or “R” keys
to move the cursor to a desired location and reenter the number as
desired. Touching the “Delete” key will delete the number directly
above the cursor.
6. Touch the “OK” key.
The message display will return to the same screen as was
displayed in step 2. Once you are finished modifying and/or
deleting Permit Telephone Numbers, press the Reset key.
(3) Registering Permit IDs
* You can register up to 5 numbers as Permit IDs in this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the “Register” [“Registration”] key. The Registration Select
screen will appear.