Filter
Top Products
Appendix D Option Units
D-3
PF-70 or PF-75 Paper Feeder can be installed below the printer.
PF-70 Paper Feeder holds approximately 500 sheets of A4 to A3
(11 × 17" in Ledger) size paper.
PF-75 Paper Feeder holds approximately 3000 sheets of A4, B5
or Letter size (8.5 × 11") paper.
For details of installing the optional paper feeder in the printer,
see the PF-70/75 Installation Guide.
DF-70/71/75 Document Finisher can be installed to the printer.
For details of installing the optional finisher in the printer, see the
DF-70/71/75 Installation Guide.
The FS-9100DN/FS-9500DN have the standard Network inter-
face. This printer supports the TCP/IP, IPX/SPX, NetBEUI, and
EtherTalk protocols, so the network printing under various plat-
forms such as Windows, Macintosh, UNIX, and NetWare is
available.
An option network interface card can be added by the following
procedure.
Turn off the printer and disconnect the power cord and
printer cable.
Remove the two screws from the option interface slot
cover (OPT2).
Insert the network interface card and secure it with the
screws removed in step 2.
Connect the network cable.
Set the network address from the printer operator panel
(for details about the modes, see Changing Network In-
terface Parameters on page 3-20).
2. Installing Option Units
2.1 PF-70/75 Paper Feeders
2.2 DF-70/71/75 Document Finishers
PF-70
PF-75
DF-70/71
DF-75
2.3 Network Interface
1
2
3
4
5