Filter
Top Products
1
Please read the Operation Guide before using the printer.
Keep it close to the printer for easy reference.
The sections of this guide and parts of the printer marked with
symbols are safety warnings meant to protect the user, other in-
dividuals and surrounding objects, and ensure correct and safe
usage of the printer. The symbols and their meanings are indi-
cated below.
WARNING: Indicates that serious injury or even death may
result from insufficient attention to or incorrect compliance with
the related points.
CAUTION: Indicates that personal injury or mechanical
damage may result from insufficient attention to or incorrect
compliance with the related points.
Symbols
The symbol indicates that the related section includes safety
warnings. Specific points of attention are indicated inside the
symbol.
....... [General warning]
....... [Warning of danger of electrical shock]
....... [Warning of high temperature]
The symbol indicates that the related section includes infor-
mation on prohibited actions. Specifics of the prohibited action
are indicated inside the symbol.
........ [Warning of prohibited action]
......... [Disassembly prohibited]
The symbol indicates that the related section includes infor-
mation on actions which must be performed. Specifics of the re-
quired action are indicated inside the symbol.
......... [Alert of required action]
........ [Remove the power plug from the outlet]
........ [Always connect the printer to an outlet
with a ground connection]
Please contact your service representative to order a replace-
ment if the safety warnings in the guide are illegible or if the
guide itself is missing. (fee required)
Caution
NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY
IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUST SUPPORT
THE PRINTER’S EMULATION MODE. The printer is factory-set
to emulate the PCL. The emulation mode can be changed by fol-
lowing the procedures described in Chapter 3.
Notice
The information in this guide is subject to change without notifi-
cation. Additional pages may be inserted in future editions. The
user is asked to excuse any technical inaccuracies or typograph-
ical errors in the present edition.
No responsibility is assumed if accidents occur while the user is
following the instructions in this guide. No responsibility is as-
sumed for defects in the printer’s firmware (contents of its read-
only memory).
This guide, any copyrightable subject matter sold or provided
with or in connection with the sale of the page printer, are pro-
tected by copyright. All rights are reserved. Copying or other re-
production of all or part of this guide, any copyrightable subject
matter without the prior written consent of Kyocera Corporation
is prohibited. Any copies made of all or part of this guide, any
copyrightable subject must contain the same copyright notice as
the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation.
KPDL and KIR (Kyocera Image Refinement) are trademarks of
Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter
X24E is a product of International Business Machines Corpora-
tion. Epson LQ-850 is a product of Seiko Epson Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of Cen-
tronics Data Computer Inc. PostScript is a registered trademark
of Adobe Systems Incorporated. Macintosh is a registered trade-
mark of Apple computer, Inc. Microsoft, Windows, and Windows
NT are registered trademarks of Microsoft Corporation. Power-
PC is trademark of International Business Machines Corpora-
tion. CompactFlash is a trademark of SanDisk Corporation.
ENERGY STAR is a U.S. registered mark. All other brand and
product names are registered trademarks or trademarks of their
respective companies.
This Kyocera Mita page printer uses PeerlessPrintXL to provide
the HP LaserJet compatible PCL 6 language emulation. Peer-
lessPrintXL is a trademark of The Peerless Group, Redondo
Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time Op-
erating System and Tools from Wind River Systems.
This printer contains UFST™ and MicroType
®
from
Agfa Corporation.