Filter
Top Products
Chapter 3 Using the Operator Panel
3-22
Press the
MENU
key. The message display returns to
Ready.
Network Status Page
2.2.5 Changing the Emulation
The emulation mode for the current interface can be changed.
Press the MENU key.
Press the 3 or 4 key repeatedly until Emulation ap-
pears. One of the emulation names shown below ap-
pears, indicating the current emulation.
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
Press the ENTER key. A blinking question mark (?) ap-
pears.
Press the 3 or 4 key repeatedly until the desired emu-
lation mode appears.
Press the ENTER key. The 2 key allows access to sub
item >Code set.
Press the
MENU
key. The message display returns to
Ready.
After changing the emulation, you have the option to
change the character code set. Available character
code sets vary depending on the current emulation.
KPDL (AUTO) Emulation
KPDL is the Kyocera’s implementation of the PostScript lan-
guage. The KPDL (AUTO) emulation enables the printer to au-
tomatically change the emulation mode according to the data
received when printing.
In addition to KPDL (AUTO) emulation, you can use the operator
panel to set another emulation mode that is used very often. The
default setting is PCL 6.
Press the MENU key.
Press the 3 or 4 key repeatedly until Emulation
>
appears.
Press the
ENTER
key. A blinking question mark (?) ap-
pears.
Press the 3 or 4 key repeatedly until KPDL (AUTO)
appears.
Press the
ENTER
key.
Press the 2 key. When >
Alt. Emulation
is dis-
played, press the 3 or 4 key. The names of alternative
emulations appear.
PCL 6 (default)
KC-GL
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
Press the ENTER key. A blinking question mark (?) ap-
pears.
Emulation
?PCL 6
10
NETWORK STATUS PAGE
FS-9500DN Page Printer
1
2
3
4
5
Emulation >
PCL 6
Emulation
?PCL 6
Emulation
?KPDL (AUTO)
Alt. Emulation
?PCL 6
6
1
2
3
4
5
6
7