Filter
Top Products
E-1
Appendix E Specifications
Specifications
Specifications
Item
Description
FS-9100DN FS-9500DN
Printing method Electrophotography, laser scan
Printing speed
( ): MP tray
A4/Letter : 36 (27) pages/minutes
B4 : 20 (19) pages/minutes
A3 : 19 (17) pages/minutes
A4/Letter : 50 (30) pages/minutes
B4 : 26 (23) pages/minutes
A3 : 26 (20) pages/minutes
Resolution Fast 1200 mode
600 dpi with KIR (Kyocera Image Refinement)
300 dpi with KIR (Kyocera Image Refinement)
First print
(A4 or Letter size, depending on input data)
Approx. 7 seconds or less (During printing)
Approx. 40 seconds (During low power
mode)
Approx. 67 seconds (During sleep mode)
Approx. 5 seconds or less (During printing)
Approx. 95 seconds (During low power
mode)
Approx. 135 seconds (During sleep mode)
Warm-up time Approx. 60 seconds or less (from power on/
sleep mode) at 23 °C, 120 or 230 V
Approx. 130 seconds or less (from power
on/sleep mode) at 23 °C, 120 or 230 V
Controller PowerPC 750 CX (350 MHz) PowerPC 750 CX (400 MHz)
Main memory 32 MB, expandable up to 288 MB
Operating system Windows 95/98/ME, Windows NT/2000, Macintosh, Linux
Interfaces Parallel 1, IEEE1284
Serial 1, RS-232C
Network 1, Protocol support:IPX/SPX, TCP/IP, DLC
Option 2, Network interface card and hard disk (KUIO-LV)
Memory card slot One Memory card (CF)
Self test Performed at power-up
Maximum duty cycle 180,000 pages/month 300,000 pages/month
Drum Amorphous silicon drum
Developer Mono-component dry developer
Main charger Positive scorotron charger
Transferring Negative charger roller
Separation DC brush separation
Drum cleaning Blade cleaner
Drum discharging Illumination by eraser LED array
Fuser Heat roller and pressure roller
Toner saving EcoPrint mode
Paper Plain paper (See Chapter 5 Paper Selection)