Filter
Top Products
Chapter 3 Using the Operator Panel
3-28
Press the
ENTER
key. A blinking cursor (_) appears
under the paper size.
Press the 3 or 4 key to select source size. Both sizes
change will simultaneously.
Press the 2 key to move the cursor to the target size.
To make a reduced print, press the 3 or 4 key to select
the target size.
Press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready.
Selecting the Printing Orientation
You can select the portrait or landscape page orientation. The
page orientation can be set whenever the message display indi-
cates Ready.
Press the MENU key.
Press the 3 or 4 key repeatedly until Page Set > ap-
pears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Orientation
appears.
Press the
ENTER
key. A blinking question mark (?) ap-
pears.
Select Portrait or Landscape using the 3 or 4 key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Page Protect Mode
Although Auto is the default setting and this menu does not usu-
ally appear, Page Protect will be forcibly set to On if a Print
overrun Press GO error occurs due to insufficient printer
memory. Be sure to return this setting to Auto in order to main-
tain high printer memory efficiency. This can be done as follows.
Press the MENU key.
Press the 3 or 4 key repeatedly until Page Set > ap-
pears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Page Pro-
tect appears.
Press the ENTER key. A blinking question mark (?) ap-
pears.
Press the 3 or 4 key repeatedly until Auto appears.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
>Zoom
[CS
]→[CS]
>Zoom
[CS]
→
[CS]98%
Page Set >
>Orientation
Portrait
5
6
7
8
9
10
Portrait
Landscape
1
2
3
4
>Orientation
? Portrait
Page Set >
>Page Protect
On
>Page Protect
? On
>Page Protect
? Auto
5
6
7
8
1
2
3
4
5
6
7
8