Filter
Top Products
Chapter 3 Using the Operator Panel
3-36
Repeat above steps until you have transferred all data
(files) that you want to write to the RAM disk. Each time
you finish writing data, a RAM disk write information
page is printed from the printer showing the information
explained in step 8 above, but pertaining only to the
data just written. To see all data contained in the RAM
disk at once, print a list of data names as explained.
See Printing a List of Data Names on page 3-33.
Deleting Data
It is possible to use the printer to delete data from a RAM disk
one by one. To delete data from a RAM disk, proceed as follows.
Check that the RAM disk contains data. Otherwise, the >De-
lete Data will not appear on the message display.
Press the
MENU
key.
Press the 3 or 4 key repeatedly until RAM Disk
Mode > appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Delete Data
appears. The data name also appears.
Press the ENTER key. A blinking question mark (?) ap-
pears before the data name.
Press the 3 or 4 key to display the desired data name.
Press the ENTER key. Processing appears and the
data is deleted from the RAM disk. The message dis-
play returns to Ready.
Printing a List of Data Names
The printer prints a list of all data names (referred to as parti-
tions) stored in a RAM disk for reference. (Printing a list is also
available for a font card.) To print a list of data names for the
RAM disk, proceed as follows.
Press the MENU key.
Press the 3 or 4 key repeatedly until RAM Disk
Mode > appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >List of Par-
titions appears.
Press the
ENTER
key. A question mark (?) appears.
Press the
ENTER
key. Processing appears and the
printing of the list starts.
See Printing a List of Data Names on page 3-33 for
details on device information.
2.2.11 Operating a Memory Card
The printer is equipped with a slot for a memory card. By insert-
ing a memory card into the printer, the following operations be-
come available. For details about the handling of the memory
card, see Appendix D Option Units.
• Reading font data
• Reading data
• Writing data
• Deleting data
• Formatting memory card
• Printing of list of partitions
RAM Disk Mode >
On
>Delete Data
DataH001
>Delete Data
?DataH001
9
1
2
3
4
5
6
7
RAM Disk Mode >
On
>List of
Partitions
>List of
Partitions ?
1
2
3
4
5
6
Partition Information
Device Information
PARTITION LIST
FS-9500DN Page Printer