Filter
Top Products
Chapter 3 Printing Through Application Software
3-7
DF-70 provides the staple function, while DF-71 provides the
punch function.
Browse File > Print. The Print dialog box will be dis-
played.
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX.
Select the range of the pages you want to print in the
document, All or Page range. To print part of the docu-
ment, check
Pages
, then enter page numbers separat-
ed by commas.
Specify the number of copies you want to print in the
Number of copies combo box in Copies.
Click the
Properties
button in the
Print
dialog box. The
Properties dialog box is displayed.
Click the
Output
tab.
Select Finisher [Face-down] or Finisher [Face-up]
as Output to drop down list, and click the OK button.
If you want to collate the output pages, check the
Collate box.
Finishing Options
Collate: sets whether the pages are collated or
not.
Reverse
Page Order: prints in the reverse page order.
Staple: selects the staple position: Upper Left,
Upper Right or Booklet (stitching posi-
tion).
Offset: Outputs pages while shifting them alter-
nately for each document.
Punch: selects the hole punch type: 2-Hole, 3-
Hole or 4-Hole.
Click the OK button in the Properties dialog box. The
Print dialog box is displayed again.
Click the OK button to start printing.
3.4 Using the Document Finisher
(DF-70/DF-71)
1
3
2
4
2
3
4
5
6
7
8
9
10