Filter
Top Products
Chapter 3 Using the Operator Panel
3-33
Repeat above steps until you have transferred all data
(files) that you want to write to the hard disk. Each time
you finish writing data, a hard disk write information
page is printed from the printer showing the information
explained in step 8 above, but pertaining only to the
data just written. To see all data contained in the hard
disk at once, print a list of data names as explained.
See Printing a List of Data Names on page 3-33.
Deleting Data
It is possible to use the printer to delete data from a hard disk one
by one. To delete data from a hard disk, proceed as follows.
Check that the hard disk contains data. Otherwise, the >Delete
Data menu will not appear on the message display.
Press the
MENU
key.
Press the 3 or 4 key repeatedly until Hard Disk >
appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >Delete Data
appears. The data name also appears.
Press the ENTER key. A blinking question mark (?) ap-
pears before the data name.
Press the 3 or 4 key to display the desired data name.
Press the ENTER key. Processing appears and the
data is deleted from the hard disk. The message dis-
play returns to Ready.
Printing a List of Data Names
The printer prints a list of all data names (referred to as parti-
tions) stored in a hard disk for reference. To print a list of data
names for the hard disk, proceed as follows.
Press the MENU key.
Press the 3 or 4 key repeatedly until Hard Disk >
appears.
Press the 2 key.
Press the 3 or 4 key repeatedly until >List of Par-
titions appears.
Press the ENTER key. A question mark (?) appears.
Press the
ENTER
key. Processing appears and the
printing of the list starts.
The printout (example above) includes the following
information;
Device Name/Number: HARD DISK/0 is indicated for
the hard disk.
Capacity: The total capacity of the hard disk in
bytes.
Used Space: The total size of the data stored in the
hard disk in bytes.
Free Space: The size of the capacity remaining in
the hard disk for storing further data,
including the amount of memory that
the printer uses for its system.
Partition Name: The name of the written data
assigned automatically by the printer.
Partition Size: The size of the written data in bytes.
Partition Type: The type of the written data i.e.,
whether it is host data (Data) or font
data (Font).
When the list of file names (partition list) for the hard
disk is printed, the message display returns to Ready.
It also prints out the Directory Status List to confirm the
directory or data that is written in PJL or KPDL
(PostScript).
Hard Disk >
>Delete Data
DataH001
>Delete Data
?DataH001
9
1
2
3
4
5
6
7
1
Hard Disk >
>List of
Partitions
>List of
Partitions ?
2
3
4
5
6
Partition Information
Device Information
PARTITION LIST
FS-9500DN Page Printer