Filter
Top Products
Chapter 6 Maintenance
6-3
Remove the seal from the rear of the old waste toner
box, and then close the opening of the box with the
seal. Seal up the old waste toner box with the supplied
plastic bag and dispose of it.
Gently pull the cleaning knob as far as it will go, push
and pull it several times, and then push it back in.
Take out the new grid cleaner from the protective bag,
and then remove the cap from the grid cleaner.
Pull the main charger approximately 5 cm (2 inches)
out.
While avoiding the main charger roller (A) to be in con-
tact with the grid cleaner pad, push and pull the main
charger several times. (Do not push the main charger
all the way in. Otherwise, water from the pad will cause
the main charger unit to become we and this may affect
printing.)
When the grid is clean, remove the grid cleaner from
the printer and dispose of it. The grid cleaner is not re-
usable.
Fit the new waste toner box to the printer.
10
11
12
13
14
(A)
15