Filter
Top Products
39
CHAPTER 1 OUTLINE (
µ
PD78054 Subseries)
1.4 Quality Grade
Part number Package Quality grade
µ
PD78052GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78052GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78053GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78053GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78054GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78054GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78P054GC-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) Standard
µ
PD78P054GC-8BT
Note
80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78P054GK-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78P054KK-T 80-pin ceramic WQFN (14 × 14 mm) Not applicable
(for function evalution)
µ
PD78055GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78055GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78056GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78056GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78058GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78058GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) Standard
µ
PD78P058GC-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) Standard
µ
PD78P058KK-T 80-pin ceramic WQFN (14 × 14 mm) Not applicable
(for function evalution)
µ
PD78052GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) Special
µ
PD78053GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) Special
µ
PD78054GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) Special
Note Under development
Cautions 1. The
µ
PD78P054GC is available in two packages. For the package that can be supplied,
consult NEC.
2. The
µ
PD78054KK-T and 78P058KK-T should be used only for experiment or function
evaluation, because they are not intended for use in equipment that will be mass-produced
and require high reliability.
Remark ××× indicates ROM code suffix.
Please refer to "Quality Grades on NEC Semiconductor Devices" (Document number C11531E) published by NEC
Corporation to know the specification of quality grade on the devices and its recommended applications.