Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
5-14 Virtual Private Networking
v1.1, August 2010
VPN Firewall VPN Connection Status and Logs
To view VPN firewall VPN connection status, select VPN from the main menu and Connection
Status from the submenu. The VPN Connection Status screen displays.
You can set a Poll Interval (in seconds) to check the connection status of all active IKE policies to
obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each
active IPsec SA (security association):
• Policy Name. The name of the VPN policy associated with this SA.
• Endpoint. The IP address on the remote VPN endpoint.
• Tx (KBytes). The amount of data transmitted over this SA.
• Tx (Packets). The number of packets transmitted over this SA.
• State. The current state of the SA. Phase 1 is “Authentication phase” and Phase 2 is “Key
Exchange phase”.
• Action. Allows you to terminate or build the SA (connection), if required.
Figure 5-16
Note: The information in the VPN Connection Status screen in Figure 5-16 does not
correspond to the example configurations that are presented in this chapter.