Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
6-18 VPN Firewall and Network Management
v1.1, August 2010
When you click on the SNMP System Info option arrow on the SNMP screen, the VPN firewall’s
identification information is displayed. This following identification information is available to the
SNMP Manager: system contact, system location, and system name.
To modify the SNMP identification information:
1. Click the SNMP System Info option arrow on the SNMP screen. The SNMP
SysConfiguration screen displays.
2. Modify any of the information that you want the SNMP Manager to use. You can edit the
system contact, system location, and system name.
3. Click Apply to save your settings.
Managing the Configuration File
The configuration settings of the VPN firewall are stored within the VPN firewall in a
configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the
user’s PC, or cleared to factory default settings.
Once you have installed the VPN firewall and have it working properly, you should back up a copy
of your settings to a file on your computer. If necessary, you can later restore the VPN firewall
settings from this file. The Settings Backup and Firmware Upgrade screen allows you to:
• Back up and save a copy of your current settings.
• Restore saved settings from the backed-up file.
• Revert to the factory default settings.
• Upgrade the VPN firewall firmware from a saved file on your hard disk to use a different
firmware version.
Figure 6-7