Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-10 Firewall Protection and Content Filtering
v1.1, August 2010
LAN WAN Outbound Services Rules
You may define rules that will specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP addresses,
and time of day. The outbound rule will block the selected application from any internal IP LAN
address to any external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see “Administrator Tips” on page 4-42).
To create a new LAN WAN outbound service rule:
1. In the LAN WAN Rules screen, click Add under the Outbound Services table. The Add LAN
WAN Outbound Service screen displays...
2. Configure the settings based on the descriptions in Table 4-1 on page 4-3.
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed in the Outbound Services table.
Note: This feature is for advanced administrators only! Incorrect configuration will cause
serious problems.
Figure 4-2