Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Virtual Private Networking 5-41
v1.1, August 2010
– User Database to verify against the VPN firewall’s user database. Users must be
added through the User Database screen (see “Configuring the User Database for
XAUTH” on page 5-41).
– RADIUS–CHAP or RADIUS–PAP (depending on the authentication mode accepted
by the RADIUS server) to add a RADIUS server. If RADIUS–PAP is selected, the
VPN firewall will first check in the User Database to see if the user credentials are
available. If the user account is not present, the VPN firewall will then connect to the
RADIUS server (see “Configuring RADIUS Clients for XAUTH” on page 5-42).
• IPSec Host. Enable authentication by the remote gateway. In the adjacent Username and
Password fields, type in the information user name and password associated with the IKE
policy for authenticating this gateway (by the remote gateway).
4. Click Apply to save your settings.
Configuring the User Database for XAUTH
The User Database screen is used to configure and administer users when Extended Authentication
is enabled as an Edge device. Whether or not you use an external RADIUS server, you may want
some users to be authenticated locally. These users must be added to the User Database
Configured Users table.
To add a new user:
1. Select VPN from the main menu and VPN Client from the submenu. The User Database
screen displays.
Figure 5-30