Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Virtual Private Networking 5-45
v1.1, August 2010
Configuring Mode Config Operation on the VPN Firewall
You need to configure two screens: the ModeConfig screen and the IKE Policies screen.
Configuring the Mode Config Screen
To configure the Mode Config screen:
1. Select VPN from the main menu and Mode Config from the submenu. The Mode Config
screen displays.
2. Click Add. The Add Mode Config Record screen displays (see Figure 5-33 on page 5-46).
Note: After configuring a Mode Config record, you must manually configure an IKE
policy and select the newly-created Mode Config record from the Select Mode
Config Record pull-down menu (see “Configuring Mode Config Operation on the
VPN Firewall.” You do not need to make changes to any VPN policy.
Note: An IP address that is allocated to a VPN client is released only after the VPN client
has gracefully disconnected or after the SA lifetime for the connection has timed
out.
Figure 5-32