Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Introduction 1-7
v1.1, August 2010
The rear panel of the FVS318G includes a cable lock receptacle, a Factory Defaults button, and a
DC power connection.
Viewed from left to right, the rear panel contains the following elements:
1. Cable security lock receptacle.
2. Factory Defaults button: Using a sharp object, press and hold this button for about ten seconds
until the front panel TEST light flashes to reset the VPN firewall to factory default settings.
All configuration settings will be lost and the default password will be restored.
3. DC power receptacle: 12V @ 1.5A.
One WAN Port
6. Active
(left side of port)
On (Green)
Off)
The WAN port is connected.
The Internet connection is down The WAN port is either not
enabled or has no link.
7. Speed
(right side of port)
On (Green)
On (Amber)
Off
The port is operating at 1,000 Mbps.
The port is operating at 100 Mbps.
The port is operating at 10 Mbps.
Figure 1-2
Table 1-1. LED Descriptions (continued)
Object Activity Description
1
2
3