Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
5-20 Virtual Private Networking
v1.1, August 2010
Local
Identifier Type From the pull-down menu, select one of the following ISAKMP identifiers to be
used by the VPN firewall, and then specify the identifier in the field below:
• Local Wan IP. The WAN IP address of the VPN firewall. When you select this
option, the Identifier field automatically shows the IP address of the selected
WAN interface.
• FQDN. The Internet address for the VPN firewall.
• User FQDN. The email address for a local VPN client or the VPN firewall.
• DER ASN1 DN. A distinguished name (DN) that identifies the VPN firewall in
the DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifier Type pull-down
menu, enter the IP address, email address, FQDN, or
distinguished name.
Remote
Identifier Type From the pull-down menu, select one of the following ISAKMP identifiers to be
used by the remote endpoint, and then specify the identifier in the field below:
• Local Wan IP. The WAN IP address of the remote endpoint. When you select
this option, the Identifier field automatically shows the IP address of the
selected WAN interface.
• FQDN. The FQDN for a remote gateway.
• User FQDN. The email address for a remote VPN client or gateway.
• DER ASN1 DN. A distinguished name (DN) that identifies the remote endpoint
in the DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifier Type pull-down
menu, enter the IP address, email address, FQDN, or
distinguished name.
IKE SA Parameters
Encryption
Algorithm
From the pull-down menu, select one of the following five algorithms to negotiate
the security association (SA):
• DES. Data Encryption Standard (DES)
• 3DES. Triple DES. This is the default algorithm.
• AES-128. Advanced Encryption Standard (AES) with a 128-bits key size.
• AES-192. AES with a 192-bits key size.
• AES-256. AES with a 256-bits key size.
Authentication
Algorithm
From the pull-down menu, select one of the following two algorithms to use in the
VPN header for the authentication process:
• SHA-1. Hash algorithm that produces a 160-bit digest. This is the default
setting.
• MD5. Hash algorithm that produces a 128-bit digest.
Table 5-2. Add IKE Policy Settings (continued)
Item Description (or Subfield and Description)