Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
LAN Configuration 3-7
v1.1, August 2010
Viewing the Network Database
To view the Network Database, follow these steps:
1. Select Network Configuration from the main menu and LAN Settings from the submenu.
The LAN Setup screen displays.
2. Click the LAN Groups tab. The LAN Groups screen displays.
The Known PCs and Devices table lists the entries in the Network Database. For each computer
or device, the following fields are displayed:
• Name. The name of the computer or device. Computers that do not support the NetBIOS
protocol will be listed as Unknown. In this case, the name can be edited manually for easier
management. If the computer was assigned an IP address by the DHCP server, then an asterisk
is be appended to the name.
• IP Address. The current IP address of the computer. For DHCP clients of the VPN firewall,
this IP address will not change. If a computer is assigned a static IP address, you must to
update this entry manually when the IP address of the computer changes.
• MAC Address. The MAC address of the computer’s network interface.
• Group. Each PC or device can be assigned to a single group. By default, a computer is
assigned to the first group (Group 1). To change the group assignment by selecting the Edit
button in the Action column.
• Action/Edit. Allows modification of the selected entry.
Figure 3-2