Filter
Top Products
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
VPN Firewall and Network Management 6-17
v1.1, August 2010
To create a new SNMP configuration entry:
1. Select Administration from the main menu and SNMP from the submenu. The SNMP screen
displays.
2. Under Create New SNMP Configuration Entry, enter the IP address of the SNMP manager
in the IP Address field and the subnet mask in the Subnet Mask field. Note the following:
• If you want to allow only the host address to access the VPN firewall and receive traps,
enter an IP Address of, for example, 192.168.1.100 with a subnet mask of
255.255.255.255.
• If you want to allow a subnet access to the VPN firewall through SNMP, enter an IP
address of, for example, 192.168.1.100 with a subnet mask of 255.255.255.0. The traps
will still be received on 192.168.1.100, but the entire subnet will have access through the
community string.
• If you want to make the VPN firewall globally accessible using the community string, but
still receive traps on the host, enter 0.0.0.0 as the subnet mask and an IP address for where
the traps will be received.
3. Enter the trap port number of the configuration in the Port field. The default is 162.
4. Enter the trap community string of the configuration in the Community field.
5. Click Add to create the new configuration. The entry displays in the SNMP Configuration
table.
To modify an SNMP configuration, click Edit in the Action column adjacent to the entry that you
wish to modify.
Figure 6-6