Filter
Top Products
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
2-8 Introduction
201-10301-02, May 2005
The FWG114P v2 Rear Panel
The rear panel of the FWG114P v2 Wireless Firewall/Print Server contains the port connections
listed below.
Table 2-1. LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
PRINTER
ACT On
Blinking
The printer is connected and powered on.
Data is being transmitted or received by the Printer port.
ALERT On (Amber) The printer has a problem, such as out of paper, out of ink, or a
paper jam.
MODEM
ACT Blinking Data is being transmitted or received by the Modem port.
LINK On (Amber) The port has detected a link with an attached device.
INTERNET Note: The operation of these LEDs depends on how the WAN port is configured.
100 (100 Mbps) On
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps) On
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Local port has detected a link with an attached device.
The Local port is transmitting or receiving data.
WLAN On
Blinking
The Wireless (WLAN) port is operating.
The Wireless (WLAN) port is transmitting or receiving data.