Filter
Top Products
Wireless Configuration 4-1
201-10301-02, May 2005
Chapter 4
Wireless Configuration
This chapter describes how to configure the wireless features of your FWG114P v2 Wireless
Firewall/Print Server.
Observing Performance, Placement, and Range Guidelines
In planning your wireless network, you should consider the level of security required. You should
also select the physical placement of your FWG114P v2 in order to maximize the network speed.
For further information on wireless networking, refer to in Appendix E, “Wireless Networking
Basics.”
The operating distance or range of your wireless connection can vary significantly based on the
physical placement of the FWG114P v2 Wireless Firewall/Print Server. The latency, data
throughput performance, and notebook power consumption also vary depending on your
configuration choices. For best results, place your wireless firewall/print server:
• Near the center of the area in which your PCs will operate.
• In an elevated location, such as a high shelf where the wirelessly connected PCs have
line-of-sight access (even if through walls). The best location is elevated, such as wall
mounted or on the top of a cubicle, and at the center of your wireless coverage area for all the
mobile devices.
• Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.
• Away from large metal surfaces.
Be aware that the time it takes to establish a wireless connection can vary depending on both your
security settings and placement. WEP connections can take slightly longer to establish. Also, WEP
encryption can consume more battery power on a notebook computer.
Note: Failure to follow these guidelines can result in significant performance
degradation or inability to wirelessly connect to the wireless firewall/print server. For
complete range and performance specifications, please see Appendix A, “Technical
Specifications.”