Filter
Top Products
NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P v2 G-1
201-10301-02, May 2005
Appendix G
NETGEAR VPN Configuration
FVS318 or FVM318 to FWG114P v2
This appendix provides a case study on how to configure a secure IPSec VPN tunnel between a
NETGEAR FVS318 or FVM318 to a FWG114P v2. The configuration options and screens for the
FVS318 and FVM318 are the same.
Configuration Template
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table G-1. Summary
VPN Consortium Scenario: Scenario 1
Type of VPN LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
Security Scheme: IKE with Preshared Secret/Key (not Certificate-based)
Date Tested: December 2003
Model/Firmware Tested:
NETGEAR-Gateway A FVS318 firmware version A1.4 or 2.0; FVM318 firmware version 1.1
NETGEAR-Gateway B FWG114P with firmware version 2 Release 2
IP Addressing:
NETGEAR-Gateway A Static IP address
NETGEAR-Gateway B Static IP address