Filter
Top Products
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Firewall Protection and Content Filtering 6-7
201-10301-02, May 2005
Follow these guidelines when setting up port forwarding inbound rules:
• If your external IP address is assigned dynamically by your ISP, the IP address may change
periodically as the DHCP lease expires. Consider using the Dyamic DNS feature in the
Advanced menus so that external users can always find your network.
• If the IP address of the local server computer is assigned by DHCP, it may change when the
computer is rebooted. To avoid this, use the Reserved IP address feature in the LAN IP menu
to keep the computer’s IP address constant.
• Local computers must access the local server using the local LAN address of the computer.
Attempts by local computers to access the server using the external WAN IP address will fail.
Remember that allowing inbound services opens holes in your FWG114P v2 Wireless Firewall/
Print Server. Only enable those ports that are necessary for your network. Following are two
application examples of inbound rules:
Example: Port Forwarding to a Local Public Web Server
If you host a public Web server on your local network, you can define a rule to allow inbound Web
(HTTP) requests from any outside IP address to the IP address of your Web server any time of day.
Figure 6-3: Rule example: A Local Public Web Server
Note: Some home broadband accounts do not allow you to run any server processes
(such as a Web or FTP server). Your ISP may check for servers and suspend your
account if it discovers active servers at your location. If you are unsure, refer to the
Acceptable Use Policy of your ISP.