Filter
Top Products
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
3-4 Connecting the FWG114P v2 to the Internet
201-10301-02, May 2005
Connecting the FWG114P v2 Wireless Firewall/Print Server
This section provides instructions for connecting the FWG114P v2 Wireless Firewall/Print Server.
Also, the Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
(SW-10023-03), included with your router, contains an animated Installation Assistant to help you
through this procedure.
Verify That Basic Requirements Are Met
Assure that the following requirements are met:
• You have your broadband Internet service settings handy.
• The computer is configured to obtain an IP address automatically via DHCP. For instructions
on how to do this, please see the Reference Manual on the Resource CD for the ProSafe
Wireless 802.11g Firewall/Print Server Model FWG114P (SW-10023-03).
1. CONNECT THE WIRELESS FIREWALL/PRINT SERVER
a. Turn off your computer and cable or DSL modem.
b. Disconnect the Ethernet cable (A) from your computer which connects to the broadband
modem.
Figure 3-1: Disconnect the broadband modem
&DEOHRU'6/PRGHP
A
Disconnect
from
computer