Filter
Top Products
Chapter 2 - Setting Up Your System Hardware
© Polycom, Inc. 2 - 5
Installing Batteries in the Remote Control
The remote control uses three AAA batteries, which are included with the system.
To install batteries in the remote control:
1. Remove the battery cover from the back of the remote control.
2. Refer to the diagram inside the remote control, and install the batteries in the
orientation shown.
3. Reinstall the battery cover on the remote control.
Powering on the System
After you have connected all your standard and optional equipment, plug the
power cord into a wall outlet.
To power on the system:
>> Press the power switch located at the back of the system.
DC IN 12V
LAN
BRI
Power switch