Filter
Top Products
Chapter 4 - Designing the User Experience
© Polycom, Inc. 4 - 15
Setting Date, Time, and Location
You can update the system with regional settings, including the location-specific
language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
3. Select and configure these settings:
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Language Sets the language for the user interface.
Country Code Specifies the country code for the system location.
Area Code Required Specifies if an area code is required to place ISDN calls in the
specified country.
ISDN International
Access
Specifies the international code required for placing ISDN calls
from the system location to another country.
Room Telephone
Number
Indicates the telephone number of the room where the system is
located.
Setting Description
Date Format and
Time Format
Specifies your format preference for the date and time display
and lets you enter your local date and time.
Daylight Saving Time Specifies whether it is daylight saving time.
Time Difference from
GMT
Specifies the time difference between GMT (Greenwich Mean
Time) and your location.
Display Time in Call Specifies the time display in a call:
•Elapsed Time – Displays the amount of time in the call.
•Local Time – Displays the local time on the screen during a
call.
•Off – Time is not displayed.
Time Server Specifies connection to a time server for automatic system time
settings.