Filter
Top Products
Chapter 5 - Managing the System Remotely
© Polycom, Inc. 5 - 9
Configuring for SNMP Management
To configure the V500 system for SNMP management:
1. In the V500 web interface or from the V500 system, go to Admin Settings >
Global Services > SNMP.
2. Configure these settings:
Setting Description
Enable SNMP Allows administrators to manage the system remotely using
SNMP.
SNMP Community Specifies the SNMP management community in which you want
to enable this system. The default community is public.
SNMP Contact
Name
Specifies the name of the person responsible for remote
management of this system.
SNMP Location
Name
Specifies the location of the system. The default is
your system name@your country name.
SNMP System
Description
Specifies the type of video conferencing device. This is a
display-only field.
SNMP Console IP
Address
Specifies the IP address of the SNMP traps sent by the system.
Enter 0.0.0.0 in this field if any SNMP management console
is capable of receiving information from this agent.