Filter
Top Products
Programming 7–35
Character Name Control Code
(ASCII)
Dec V
alue
CHR$(n)
Printer Response
Escape, “Y”
ESC Y
(27) (89)
(n1) (n2)
a) Option code 34.0 causes ESC Y to act
as even dot plot. (Same as 04 code when
40.0 is set.)
b) Using 34.1, ESC Y is ignored; data
following is interpreted, literally.
Escape, “Z”
ESC Z
(27) (90)
(n1) (n2)
a) Option code 34.0 causes ESC Z to act
as odd dot plot. (Same as 05 code when
40.0 is set.)
b) Using 34.1, ESC Z is ignored;
data following is interpreted literally.
Escape, Zero
ESC 0
(27) (48) Sets 8 lines per inch for the following
lines. Lights 8 lpi LED.
Escape, One
ESC 1
(27) (49) Sets 10 lines per inch for the following
lines. Lights 8lpi LED.
Escape, Two
ESC 2
(27) (50) Sets 6 lines per inch for the following
lines. Turns 8 lpi LED off.
Escape, Three
Decimal Number
0–255
ESC 3(n)
(0 <
n <
255)
(27) (51) (n)
Sets line spacing equal to n/216 inch.
Escape, Six
ESC 6
(27) (54)
Selects decimal range 128–160 to be
printable characters until cancelled by
ESC 7.
Escape, Seven
ESC 7
(27) (55)
Selects decimal range 128–160 as control
characters.
Escape, Eight
ESC 8
Turns the paper sensor OFF.
Escape, Nine
ESC 9
T
urns the paper sensor ON.
Escape, –0 ESC –0
Turns the underline mode OFF.
Escape, –1 ESC –1
Turns the underline mode ON.
Escape, –2 ESC –2
Turns the double– underline mode ON
Escape, –3 ESC –3
Turns the double–underline mode OFF