Filter
Top Products
Installation2–4
Site Requirements
When selecting a printer location, consider interface requirements, power
requirements, and environmental factors. Select a location that has the proper
power source available and is within the maximum cable length
specifications for interfacing with the host computer. The printer is designed
to operate in a relatively dust free environment such as a computer room or
business office with an ambient temperature of 5° to 40° C (41° to 104° F),
and a relative humidity of 10% to 90%. The site selected for the printer must
also allow air to circulate freely all around the printer. Finally, a minimum of
three feet clearance behind the printer should be provided to allow air
circulation and easy access to the paper stacking area.
CAUTION
The warranty may be voided if adequate printer ventilation is not
provided. Overheating and serious damage to printer components can
occur if the air vents at the sides and bottom of the printer are blocked.
VORSICHT
Die Gewährleistung könnte ungültig werden, wenn nicht genügen
Druckerlüftung vorhanden ist. Überhitzung und schweren Schaden der
Druckerkomponenten könnte vorkommen, wenn die Entlüftungsschlitze
an den Seiten und unten am Drucker blockiert sind.