Filter
Top Products
Operation 3–13
3. Feed the paper into the slot from underneath if the printer is on a
pedestal or from the front if the printer has a front feed attachment.
Continue to feed the paper until it passes between the ribbon mask and
the wide metal bar.
Paper
Slot
Pedestal
4. Load paper on the left tractor sprocket pins and close the tractor gate.
Load paper on the right tractor sprocket pin. Make sure the paper is
aligned horizontally (the correct holes are across from one another), and
close the right tractor gate.
Sprocket Holes
5. If the left tractor was kept stationary, proceed to step 7. If not, slide both
tractors so that the edge of the paper lines up with the first mark on the
printer’s ruler, or where you want the left margin to print. Lock the left
tractor lever (the black lever).
Ruler